Deal of the Day
Hose Bibbs (Faucets)
Shower and Urinal Valves
Hand Soap, Sanitizers and Dispensers
Coin-Op Shower Equipment
Tekk 2-Way Radios and Accessories
Dog Waste Disposal Stations and Supplies
Ground Maintenance Supplies
PVC Pipe Maintenance Supplies Closeouts
Pest Control Supplies
Duct, Electrical, and Teflon Tape
100-lb. Propane Tank Multi-Valve
This 100 lb. Cylinder Multi-Valve is a 10% valve, indicating a full tank through its bleeder valve when the tank is filled with 100 lbs. propane gas, allowing ample room for liquid expansion in warm weather.
This valve also includes the top valve, multi-fill design allowing tank to be filled directly straight through the valve from the top double check valve (special filling adapter required), as well as through the POL fitting.
The 10 Per Cent design (11.3-inch dip tube) eliminates nuisance, and possibly dangerous overfill blow-off through the safety relief valve. Its double o-ring stem seal assures a leak-proof valve when open. The seat disc is the static, non-rotating type eliminating seat abrasion.
BEFORE YOU READ ANY FURTHER, PLEASE READ THIS!
Any work performed on propane tanks must be performed by qualified personnel trained to recertify propane tanks. Check with your propane supplier for proper training or go to
National Propane Gas Association.
100 lb. - 200 lb. Propane Tank Multi-Valve
10 Per Cent Design (11.3-Inch Dip Tube)
2 in 1 Warning Label
DOT Cylinder Lables
26-Inch Leverage Rod
One-Eyed Huskie Propane Valve Wrench - CHOOSE ONE
Yellow Warning Label for L.P. Tanks
Universal Propane Wrench
OPD Tank Valve
Terms & Conditions
All Rights Reserved.