Deal of the Day
Hose Bibbs (Faucets)
Shower and Urinal Valves
Hand Dryers and Towel Dispensers
Hand Soap, Sanitizers and Dispensers
Coin-Op Shower Equipment
Tekk 2-Way Radios and Accessories
Dog Waste Disposal Stations and Supplies
Ground Maintenance Supplies
PVC Pipe Maintenance Supplies Closeouts
Pest Control Supplies
Duct, Electrical, Teflon, and Caution Tape
OPD Tank Valve 40 Lb - OPD-40
This OPD Cylinder Valve is designed for use on steel DOT LP Gas cylinders with 40 lbs capacity.
Nylon tapered seat disc on shut-off provides positive closing.
Full size 1 1/4" wrenching boss located at rear of the valve minimizes possible damage to valve outlet when installing into cylinder.
Relief valve is recessed in body forging to resist damage and tampering.
Low profile fits within cylinders' protective collars.
Self tapping screw secures handwheel to stem.
Slotted vent reduces possibility of tampering.
Dip Tube Length is 6.5 Inches.
Any work performed on propane tanks must be performed by qualified personel trained to recertify propane tanks. Check with your propane supplier for proper training or go to
National Propane Gas Association
The outlet features a back check assembly - designed to prevent gas flow until a leak-free connection is made with an inlet adapter.
The valve complies with both the ANSI Z21.58 Standard for Outdoor Cooking Appliances and the CAN/CGA-1.6 Standard for Container Connections which apply to new barbecue grill cylinders manufactured after October, 1994.
Also conforms to requirements in the 1998 edition of NFPA 58.
26-Inch Leverage Rod
Saf-T-Lok (Male POL Lock)
One-Eyed Huskie Propane Valve Wrench
P.O.L. Pigtail Propane Hose 20"
Dual Tank Propane Regulator
Teflon Tape 1/2'' x 260', 10 Roll Pack
2 in 1 Warning Label
Sale Price: $409.95
Terms & Conditions
All Rights Reserved.