Deal of the Day
Hose Bibbs (Faucets)
Shower and Urinal Valves
Hand Dryers and Towel Dispensers
Hand Soap, Sanitizers and Dispensers
Coin-Op Shower Equipment
Tekk 2-Way Radios and Accessories
Dog Waste Disposal Stations and Supplies
Ground Maintenance Supplies
PVC Pipe Maintenance Supplies Closeouts
Pest Control Supplies
Duct, Electrical, Teflon, and Caution Tape
One-Eyed Huskie Propane Valve Wrench - CHOOSE ONE
Valves can be changed in less than 5 minutes.
One-Eyed Huskie Propane Valve Wrench
One-Eyed Huskie Standard Propane Valve Wrench - HUSKIE-1
One-Eyed Huskie OPD Propane Valve Wrench - HUSKIE-OPD
This is the easiest, best fitting valve wrench on the market!
RED = Wrench for OPD Valves
BLACK = Wrench For Older And Standard Valves
HUSKIE-OPD - 29mm (1.142 Inches) Jaw Opening - (Red) Fits modern valves
HUSKIE-1 - 30mm (1.18 Inches) Jaw Opening - (Black) Fits old style valves
This valve wrench is used to install and remove valves when retrofitting tanks. It fits precisely on the valve and allows you to easily install the valve.
Together with our LR-1 26-inch leverage rod, its beefy design makes easy installation or removal of any valve.
We strongly suggest you purchase our HUSKIE-1 to remove standard valves and the HUSKIE-OPD to remove OPD (Overfill Prevention Device) valves.
The cut on the OPD wrench is slightly tighter to snugly fit OPD valves and not cause indentations on the brass on the new OPD valves. Wrenches are dyed different colors to distiguish OPD from regular wrench. Both wrenches us the same LR-1 Leverage Rod.
Beefy Wrench Lasts a Lifetime
Precise Fit Will Not Damage Valves
Machine Cut Jaws
Powder Coat Paint Finish
100-lb. Propane Tank Multi-Valve
100-lb. Propane Tank Valve
26-Inch Leverage Rod
P.O.L. x 1/4" Copper Inverted Flare Pigtail
Teflon Tape 1/2'' x 260', 10 Roll Pack
P.O.L. Pigtail Propane Hose
DOT Cylinder Lables
Terms & Conditions
All Rights Reserved.