Exposed Push Button Shower Valve Time And Temperature Adjustable

Satisfied with price, quality, and service. Thank you

Thank you!

Happy customers

Thank you!

Want an easy install? Buy this!

Both are good. We wish you had a wider selection of products.

Intsalled these at our community pool 2 summers ago. They were used A LOT . We have yet to have a single issue. We just bought more to install at our rec facility down the road. Can't beat this quality for the price you're paying. Very reasonable . Thank you

I bought this based on other reviews. I am glad that I did. It was simple enough to install (but took some time), it works, and the construciton is solid. I will see how it holds up

We love these

We will be back. Thanks

We have them at 4 different hockey rinks. You can imagine how beat up they get with a bunch of teenagers , but these valves are holding strong.

Thank you

Installed these about 3 months ago at our campground. They were barely used. When the season started on them one of them was stuck open. King supply sent us a new one. Then this started happening with another one. King Supply got an earful from us and swore it was an installation issue. They ended up being correct. if you screw these on too tight or make the cartrdige too tight the water will stay on . Once we loosened up the cartridge it worked. All 4 work perfect now and we love them. I wish there was a warning about this on their instructions. I think that would be helful. We appreciate King Supply's customer service and patience.

Good item. Would appreciate better pricing for customers who order frrequently. I can't buy 50+ at once, but hve purchased at least 50 over the last 2 years.

For what you get we think King's pricing on these is very fair. Not the fanciest product, but simple and sleek looking. Gets the job done.

Works just lilke we wanted

No complaints

Using these at our boat house. They work as promised. We would buy again.

Super sturdy works perfect

if you put a fitlers on your water these will last forever.

We've veen using different variations of these for 4 years now. They are great. Our only request would be a valve that lasts a bti longer than a minute. 2 minutes would be perfecy and fair for our residents

We reccomend these

Got these for our teenage boys and girls who were taking 30 minute showers using all the water and costing us a fortune. The girls hate them, but our bills have gone down so we're happy. Thanks!

These are exactly what we needed for our faciltiies. We wish that you offered terms for government agenices.

Amazing service and fast shipping. We are grateful

The insert that came with the valves says the time is not adjustable, BUT it is! You could improve the insert/instructions by including the following information: Adjust the time the valve is open using the enclosed allen wrench, inserted into the small hole in the front of the valve button. (The little allen wrench supplied for adjusting the time is 1.25 mm, or .050", or 1/20". This size is not found in any standard Allen wrench sets, Metric or SAE, so don't throw it away or lose it!). The allen head time adjusting **** it fits into, inside, turns with the access hole, when you turn the temp adjustment. Turning the allen wrench Left is Longer valve open time, Right is shorter valve open time. One full turn is about 5 seconds of time adjustment.

There was no insert/instructions with the replacement cartridges. It would help if you gave basic instructions on how to replace the cartridge: Turn off the water and relieve the pressure in the system, loosen the top & bottom allen head retaining screws at the back of the valve body to allow the cartridge to slide out, unscrew/remove the 2 turning stubs, remove the 2 allen head set screws that hold the collar, remove the collar, pull the cartridge out, using an adjustable wrench, remove the threaded steel sleeve from the old cartridge, apply plumber's grease to all rubber seals and O-rings including under the perforated plastic end cover/sleeve on the new cartridge, thread/install the steel sleeve onto the new cartridge hand tight, install the prepped cartridge into the valve body, tighten the rear retaining screws, install the collar and set screws, install the turning stubs. Turn on the water. If hot is cold and cold is hot, the cartridge is in upside down. Turn off the water, remove the cartridge, turn it 180�, reinstall it and turn the water on. Adjust the time using the enclosed allen wrench, inserted into the small hole in the front of the valve button. See time adjustment instructions above.

Thanks! Heide Messing

The SLHVE shower faucets just dont seem to be durable enough for frequent use, and had to replace o-rings and cartridges often, but since I put signs as to how to use the push button faucets it did seem to help. King Supply did A very good job at replacement and had my customer up and running again.. Thank you for the great service and will use King supply in the future!

Exposed Push Button Shower Valve (Adjustable Time&Temp)

Excellent service! Thank you!

We have many of these valves. They work exacly as we need them to at our shetlters but Weve had to replace the cartrdiges earlier than we expected to. We were told by King Supply that a water filter would fix this . We are looking into it

These are the the facuets work great. Have installed them in several hospitals.