Home > Propane Supplies >

P.O.L. Copper Inverted Flare Pigtail, 20"
P.O.L. x 1/4" Copper Inverted Flare Pigtail
Alternative Views:

Our Price: $18.95

Product Code: POL-20C


P.O.L. x 1/4" Copper Inverted Flare Pigtail

Pigtails are connected between an LPG bottle and a Changeover Valve or directly into the inlet of a LPG gas pressure regulator.
General Information
  • Material: Copper
  • Male POL x 1/4"
  • Inverted Flare 7/8"
  • Hex Nut
  • Long Nipple Excess Flow Check
  • UL/CGA Listed
  • RV hookups
Listed Hint: Do not use Teflon tape or pipe dope on either end of this pigtail. They seal against leaks by compression seating only. It is recommended to use a light oil sparingly on the threads to lubricate while tightening. Caution: the 1/4-inch inverted flare fitting has a very fine thread. Over-tightening can strip the threads. No warranty given on stripped thread fittings. To prevent stripping the thread, loosely tighten the inverted flare fitting until snug, when you feel the flare touch against the inverted flare seat in the regulator, then turn no more than 1/4 turn to compress the flare. Check for leaks with soap bubble solution or dish liquid and water mix.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Propane Supplies